| Technical Data for Design Referrence | Dimension | Normal | Premium |
| General Dimension | < 25mm | +/- 0.25 | +/- 0.15 |
| 25~50mm | +/- 0.4 | +/- 0.30 | |
| 50~75mm | +/- 0.5 | +/- 0.40 | |
| 75~100mm | +/- 0.7 | +/- 0.50 | |
| 100~150mm | +/- 1.0% | +/- 0.65 | |
| > 150mm | +/- 1.0% | +/- 1.0% | |
| Straightness | < 50mm | +/- 0.25 | +/- 0.13 |
| 50~100mm | +/- 0.38 | +/- 0.25 | |
| 100~150mm | +/- 0.5 | +/- 0.30 | |
| > 150mm | +/- 0.76 | +/- 0.38 | |
| Flatness | < 25mm | +/- 0.2 | +/- 0.1 |
| 25~50mm | +/- 0.4 | +/- 0.15 | |
| 50~100mm | +/- 0.64 | +/- 0.25 | |
| 100~150mm | +/- 0.76 | +/- 0.38 | |
| Concentricity | Wall thickness 6mm | +/- 0.2 | +/- 0.1 |
| Wall thickness 12mm | +/- 0.3 | +/- 0.2 | |
| Radius | < 50mm | +/- 0.4 | +/- 0.13 |
| > 50mm | +/- 0.8% | +/- 0.6% | |
| Roundness | 13mm | +/- 0.13 | +/- 0.1 |
| 25mm | +/- 0.25 | +/- 0.15 | |
| 38mm | +/- 0.3 | +/- 0.20 | |
| 50mm | +/- 0.38 | +/- 0.25 | |
| Roughness | 300 Series S.S. | 90~125RMS | 60~90RMS |
| 400 Series S.S. | 100~125RMS | 60~100RMS | |
| Minimum Wall Thickness | Stainless Steel (S.S.) | 1.5mm | 1.0mm |
| Weight Limit | 5g~25kgs | 5g~35kgs | |
| Dimension Limit | 300x300x300mm within | 350x350x350mm within |